JAMTESTERS LOGO


Headset tester
HT-2



OPT-1



headset tester




The HT-2 is one of the best headset tester for high impedance aviation helmets headsets, headphones and mikes.

It is iqually useful in the lab, the shop or the flight line. 

The HT-2 is a microprocessor-based headset tester that can test HIGH impedance:

FIXED WING HEADSETS

HELICOPTER HEADSETS

GROUND MECHANIC HEADSETS

WIRED GROUND CREW HEADSETS

WIRELESS GROUND CREW HEADSETS

WIRED AIRCRAFT PUSH BACK HEADSETS

BLUETOOTH AIRCRAFT PUSH BACK HEADSETS

AUXILIARY MIKES

HIGH IMPEDANCE HEADPHONES

HEADSETS AND MICROPHONES EXTENSION WIRES

The HT-2 is a hands free and fully autonomous headset tester; it does not need, as other testers do, a headset in perfect condition to check other headsets or microphones.
Not having to keep depressed  any  switch to activate the tester gives the advantage of using both hands to find momentary interruptions in the wiring.

This tester in case of distortion  can quickly determine if the distortion is generated in the headphones side  or the mike side of the headset. Its design, its  high quality speaker, its pure sine generator and its low distortion amplifiers make it  possible.

The HT-2 can test headsets f.e. SENNHEISER HME100, PELTOR 8006,8003, and others high impedance aviation headsets made by BOSE , DAVID CLARK , TELEX , SENNHEISER , LIGHTSPEED , CLARITY ALOFT, SIGTRONICS , PILOT AVIATION  etc.


Features:

Test microphones fidelity by amplifying its output, under normal speech conditions, and applying the signal to the phones or the front  panel speaker.

Test headphones, using  an external microphone or an internal 1 KHz sinusoidal tone.

Test mono a nd stereo headphones.

Test PTT switches and extension wires.

It is powered by a 9V battery and has a battery     alert when the battery is low.

 
Accepts:


M642/4-1 (PJ-055B)

M642/5-1 (PJ-068)

M642/2-1 (PJ-051B)

U-174/U plugs.


Options:

OPT-1  AC Adapter (*):
With this option the HT2 can be electrically powered by either a replaceable 9V battery or externally with 90-240 VAC, 50/60 Hz.

(*)These option is only available at the moment of the purchase of the tester.


Get a free quote!